Gefen EXT-HDMI1.3-848CPN Bedienungsanleitung

®8x8 Crosspoint Matrixfor HDMI® 1.3EXT-HDMI1.3-848CPNUser Manualwww.gefen.com

7How to Switch between Inputs and OutputsThe main display of the Gefen 8x8 Crosspoint Matrix for HDMI 1.3 is a sixteen-character, two-line LCD. This d

8RMT-848IR Remote1 LED Button Press IndicatorThis LED will be activated momentarily each time a button is pressed.2 Display and Source Selection But

9Installing the RMT-848IR Battery1. Remove the battery cover on the back of the remote.2. Insert the included battery into the open battery slot. T

10How to Resolve IR Code Confl ictsIn the event that IR commands from other remote controls interfere with the supplied IR remote, changing the remote

11The IR remote control will allow the user to select which source will be routed to which output. Each of the two (2) outputs are assigned a group of

12SETTING THE IR CHANNEL ON THE MATRIX1. Press the Input -, Input + and Output - buttons simultaneously.2. The Main LCD Display will show the followi

13RS-232 SERIAL INTERFACEThis feature allows for easy integration into automated systems capable of transmitting RS-232 commands. Use the settings be

14RS-232 COMMANDSSimplifi ed syntax was used for command implementation for faster operation with the device. RS-232 commands are not case-sensitive.C

15RS-232 COMMANDSA CommandRoutes the specifi ed Input to Output A.Syntax:A[no space]param1Parameters:param1 HDMI Input (Source) [1 - 8]Example:A5

16RS-232 COMMANDSL CommandSets the specifi ed Input to use Slow Switching.Syntax:L[no space]param1Parameters:param1 HDMI Input (Source) [1 - 8]M C

ASKING FOR ASSISTANCERev A4Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM

17RS-232 COMMANDSRS CommandReset the matrix to the default routing status (A=1, B=2, C=3, D=4, E=5, F=6, G=7, H=8). The IR address will be set to 0.S

18RS-232 COMMANDSZ0 CommandModifi es the EDID and forces 10-bit Deep Color.Syntax:Z0Parameters:NoneZ1 CommandModifi es the EDID and forces 12-bit Deep C

19FAST SWITCHINGFast Switching TechnologyFast Switching Technology (FST) is a Gefen software implementation for HDMI 1.3 products. FST was created to

20FAST SWITCHINGChanging between Fast Switching and Slow Switching ModesEach HDMI input can be set to use either Fast Switching or Slow Switching. Fa

214. Once the switching mode has been set, press the Menu button to accept the changes.The front panel shows which inputs are set to Slow Switching a

22EDID MANAGEMENTExternal EDID ManagementThe 8x8 Crosspoint Matrix for HDMI 1.3 features EDID Management. Before the source can send video or audio s

23RACK MOUNT INSTALLATIONRack mount ears are provided for installing the Matrix in a 5U rack space. To mount the Matrix in the rack, do the following:

24SPECIFICATIONSVideo Amplifi er Bandwidth ... 225 MHz Single Link Range...

25WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] A4PbThis product uses

CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Connecting and Operating The Gefen 8x8 Crosspoint Matrix For HDM

1INTRODUCTIONCongratulations on your purchase of the Gefen 8x8 Crosspoint Matrix for HDMI 1.3. Your complete satisfaction is very important to us.Gefe

READ THESE NOTES BEFORE INSTALLING OROPERATING THE GEFEN 8X8 CROSSPOINT MATRIX FOR HDMI 1.3• There is no internal scaling in the Gefen 8x8 Crosspoint

3FEATURESSupported HDMI 1.3 Features• 225 MHz (up to 12-bit YUV 444 @ 1080p)• Deep Color• Dolby TrueHD and DTS-HD Master Audio• Lip-SyncFeatures• D

4PANEL LAYOUTFront PanelBack Panel87910 11123564

5PANEL DESCRIPTIONS1 Main LCD DisplayThis is a two-line, sixteen-character display which displays status information and is also used to manage displ

6CONNECTING AND OPERATING THE 8X8 CROSSPOINT MATRIX FOR HDMI 1.3How To Connect The 8x8 Crosspoint Matrix For HDMI 1.31. Using the supplied HDMI cable