Gefen GEF-DVI-1044DL Bedienungsanleitung

10x4 DVI Dual Link MatrixGEF-DVI-1044DLUser Manualwww.gefenpro.com

7Front Panel ControlsThe GefenPRO 10x4 DVI Dual Link Matrix uses an LED display that shows the current routing status and is used to control the Matri

82. Press the Input 2 button.The Input 2 button will glow blue momentarily and the LED will change from Input 1 to Input 2.The Input 2 and for Output

92. Press the button for Input 3.The button for Input 3 will glow blue momentarily and each LED will change from Input 1 to Input 3.In the example ab

10Masking OutputsAny monitor can be blocked (masked) from displaying video. A single monitor or multiple monitors can be masked at any one time.Examp

11Unmasking OutputsExample 1:Unmasking Output 2 and Output 3.1. Press the buttons for Output 2 and Output 3. Each button will glow blue, indicating

121 Activity IndicatorThis LED will be activated momentarily each time a button is pressed.2 Display and Source Selection ButtonsThese buttons are us

13Installing the RMT-8IR Battery1. Remove the battery cover on the back of the IR Remote Control unit.2. Insert the included battery into the open b

14IR REMOTE CONFIGURATIONHow to Resolve IR Code Confl ictsIn the event that IR commands from other remote controls interfere with the supplied IR Remot

15EDID. What is it and what is it used for?Under normal circumstances, a source device (digital and analog) will require information about a connected

16What features are available via the RS-232 serial communications port?The 10x4 DVI Dual Link Matrix Switcher can accept commands through the RS-232

ASKING FOR ASSISTANCETechnical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM Monda

17RS-232 SERIAL CONTROLRS-232 FeaturesRS-232 remote functions are used to control of this product’s features. Features include input to output routing

18RS-232 SERIAL CONTROL#EDIDDSTOLO FunctionThe #EDIDDSTOLO function reads the downstream EDID and stores it to a Local EDID input.Syntax:#EDIDDSTOLO p

19RS-232 SERIAL CONTROL#EDIDBATOLO FunctionThe #EDIDBATOLO function reads the downstream EDID and stores it to any local input.Syntax:#EDIDBATOLO para

20RS-232 SERIAL CONTROL#LOCKEDID FunctionThe #LOCKEDID function secures the Local EDID and disables the automatic loading of the downstream EDID after

21RS-232 SERIAL CONTROL#PRDSEDID FunctionThe #PRDSEDID function reads the downstream EDID and sends it to the serial port.Syntax:#PRDSEDID param1Param

22RS-232 SERIAL CONTROL#PREDIDST FunctionThe #PREDIDST function reads the downstream EDID. This function displays a table containing details relating

23RS-232 SERIAL CONTROL#RSTIP FunctionThe #RSTIP function sets the IP confi guration to the default settings.Syntax:#RSTIPParameters:None#SIPADD Functi

24RS-232 SERIAL CONTROL#SNETMASK FunctionThe #SNETMASK function specifi es a new net mask.Syntax:#SNETMASK param1 param2 param3 param4Parameters:param1

25RS-232 SERIAL CONTROL#SPORT FunctionSpecifi es a new port.Syntax:#SPORT param1Parameters:param1 Port [0 - 255]Notes:A reboot is required after t

26RS-232 SERIAL CONTROLGeneral FunctionsFunction Description#ACTIVEBOLO Enables the boot loader#FADEFAULT Set matrix local and routing status to defau

CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Connecting And Operating The 10x4 DVI Dual Link Matrix7 Fro

27RS-232 SERIAL CONTROL#LOCKPOWER FunctionThe #LOCKPOWER enables/disables the power lock state. Enabling this feature will store the 5V status for ea

28RS-232 SERIAL CONTROL#RMTIRADD FunctionThe #RMTIRADD function set the remote IR channel.Syntax:#RMTIRADD param1Parameters:param1 IR channel

29RS-232 SERIAL CONTROLCommandsCommand DescriptionR Routing commandS Routes a single input to all outputsM Returns the current routing status of matri

30RS-232 SERIAL CONTROLM CommandThe M command displays the current routing status of the matrix.Syntax:mParameters:NoneF CommandThe F command returns

31IP CONTROL - MANAGE EDIDMANAGE EDIDThe Manage EDID page is used to see the status of the EDID saved in the local storage location for each input. Th

32IP CONTROL - MANAGE EDIDSET INPUT TO DEFAULT EDID Pressing the SET INPUT TO DEFAULT EDID button will display additional options. The following page

33IP CONTROL - MANAGE EDIDCOPY EDID Pressing the COPY EDID button will display additional options. The following page will open.On this page, the user

34IP CONTROL - MANAGE EDIDThe 10x4 DVI Dual Link Matrix allows the Local EDID to be preserved after the unit has been powered off. Once enabled, this

35IP CONTROL - MASKINGThe Masking page is used to hide an output from displaying any video. From this page, all outputs can be set to “Active” or “Mas

36IP CONTROL - CONFIGURATIONIP CONFIGURATIONThe IP Confi guration page is used to set the IP settings that will be used to access the Web interface. Th

1Congratulations on your purchase of the GefenPRO 10x4 DVI Dual Link Matrix. Your complete satisfaction is very important to us.GefenPROIn the realm o

37IP CONTROL - BACKUP/RESTORE & POWER MANAGEMENTBACKUP/RESTOREThe Backup/Restore page is used to backup and restore complete setup confi gurations.

38FIRMWARE UPDATEFIRMWARE UPDATE PROCEDURETo Begin the update procedure the unit’s Boot Loader must be activated. To activate the Boot Loader please f

39FIRMWARE UPDATEFollow the on-screen instructions to complete the fi rmware update process:1. Press [1] on the computer keyboard to begin downloading

40Video Amplifi er Bandwidth ... 165 MHz per channelSingle Link Range ...

41Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects and Gefe

42LICENSINGlwIP is licenced under the BSD licence:Copyright (c) 2001-2004 Swedish Institute of Computer Science.All rights reserved.Redistribution and

Pb20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefenpro.com [email protected] A11.8

2READ THESE NOTES BEFORE INSTALLING OROPERATING THE GEFENPRO 10X4 DVI DUAL LINK MATRIX• The 10x4 DVI Dual Link Matrix does not support HDCP content.•

3FEATURESFeatures• Increases productivity• Supports resolutions up to 3840x2400• Front panel control buttons for local switching• IP Control• Seria

4Front PanelPANEL LAYOUTBack Panel12456879103

5PANEL DESCRIPTIONS1 OFF ButtonUse this button to mask selected outputs. See page ## for details.2 Input Selection Buttons 1-10These buttons are use

6How to Connect the 10x4 DVI Dual Link Matrix1. Connect up to 10 DVI source devices to the DVI inputs on the rear panel of the 10x4 DVI Dual Link Mat