4x2 Matrixfor HDMI®GTB-MHDMI1.3-442GTB-MHDMI1.3-442-BLKUser Manualwww.gefentoolbox.comGefen
7CONNECTING AND OPERATINGTHE 4X2 MATRIX FOR HDMIHow to Operate the 4x2 Matrix for HDMIUse the Out 1 and Out 2 button to route the selected Hi Def sou
IR REMOTE DESCRIPTIONRMT-8MIR Remote1 Activity IndicatorThis LED will be activated momentarily each time a button is pressed.2 Display and Source Se
The IR remote control will allow the user to select which source will be routed to which output. Each of the two (2) outputs are assigned a group of f
IR REMOTE INSTALLATIONInstalling the IR Remote Battery1. Remove the battery cover on the back of the remote.2. Insert the included battery into the
IR REMOTE CONFIGURATION111 21 21 21 2Remote Channel 3:Remote Channel 1:DefaultRemote Channel 2:Remote Channel 4:The IR channel selecte
12How to change the IR channelUse the following procedure to set the proper IR channel on the 4x2 Matrix for HDMI.1 Press and hold the Out 1 button f
IR EXTENDER INSTALLATIONUsing the IR ExtenderAn optional IR Extender (Gefen Part No. EXT-RMT-EXTIR) can be used to extend the IR capabilities of the 4
What is EDID?The 4x2 Matrix for HDMI features automatic and manual EDID management to maximize compatibility of all attached devices. First it is nec
EDID MANAGEMENTEDID Mode Selection1. EXTERNAL MODE: To use this mode, set the EDID Mode Switch on the front panel to the EXT position. In External EDI
EXTERNAL EDID MANAGEMENTThe 4x2 Matrix for HDMI features EDID Management. Before the source can send video or audio signals to the display, the sour
ASKING FOR ASSISTANCERev A8Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM
EDID MANAGEMENTAudio Channel SelectionThe 4x2 Matrix for HDMI features a switch that will modify the supported audio formats listed in the pre-program
Video Data BlockAudio Data Block Speaker Allocation1080p@60Hz1080p@50Hz1080i@60Hz (native)1080i@50Hz2-channel:LPCM 2CHMulti-channel:LPCM 2CHLPCM 8CHAC
543219876123456789Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface19This feature allows for easy integration into auto
RS-232 SERIAL CONTROL COMMANDSCommandsThe following Commands are not case-sensitiveCommand Description1,2,3,4,5,6,7,8 Input selection for Output 1 or
SReturns the current status of the Matrix.Syntax:SParameters:NoneRemarks:When using the S command, the following information is returned:Power state:
XPower OFF the Matrix.Syntax:XParameters:NoneYPower ON the Matrix.Syntax:YParameters:None22RS-232 SERIAL CONTROL COMMANDS
23WALL MOUNTING INSTRUCTIONSThe GefenToolBox 4x2 Matrix for HDMI should be mounted vertically in a wall or cabinet with wood/drywall screws as shown i
SPECIFICATIONS24Video Bandwidth ... 225 MHz Pixel Clock / Speed ...
25Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects and Gefe
Rev A820600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefentoolbox.com [email protected]
CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Connecting And Operating The 4x2 Matrix for HDMI8 IR Remote Des
1Congratulations on your purchase of the GefenToolBox 4x2 Matrix for HDMI. Your complete satisfaction is very important to us.About GefenToolBoxGefenT
READ THESE NOTES BEFORE INSTALLING OROPERATING THE 4X2 MATRIX FOR HDMI• EDID contains the A/V capabilities of a display device in regards to video re
HDMI 1.3 Features• 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color• Dolby TrueHD and DTS-HD Master Audio • Lip SyncFeatures• Displays any of fo
PANEL LAYOUT111489104623Top57Front
PANEL DESCRIPTIONS51 Locking HDMI Input Ports (4)Connect a Hi Def source device to any of these input ports.2 Audio Channel Selection SwitchModifi es
How to Connect the 4x2 Matrix for HDMI1. Use the included HDMI cables to connect up to four (4) source devices to the HDMI In ports on the 4x2 Matri
Kommentare zu diesen Handbüchern